中孔MCM-41锚合Zr（IV）-salen催化剂制备及用于硫化物氧化制亚砜和Knoevenagel缩合反应

通过NH2-MCM-41与水杨醛反应得到席夫碱配体,然后加入八水氧氯化锆形成络合物,制得Zr(IV)-salen-MCM-41催化剂。采用X射线衍射、N2吸附-脱附、热重、红外光谱、电感耦合等离子体发射光谱和能量散射谱等分析手段对催化剂结构进行了表征。在含有该催化剂的体系中进行了硫化物选择氧化为亚砜以及醛与丙二腈和氰乙酸乙酯的Knoveonagel缩合反应,并考察了催化剂的循环使用性能。     

2,6-二苯基苯酚及其聚合物的合成与应用进展

2,6-二苯基苯酚是一种重要的精细化工中间体,随着经济的发展和科学技术的不断进步,它及其聚合物的用量和用途都在不断扩大拓宽。本文主要介绍了近年来它及其聚合物不同的合成路线及其优缺点,对它们在吸附材料、工程塑料、抗氧化剂、气体分离膜等方面的应用研究进展进行了总结,并对它们的应用前景进行了展望。     

锂离子电容器(LIC)产业前沿技术研究进展

新能源战略体系的建设和电子技术的飞速发展对储能器件的性能提出了更高的要求,锂离子电容器是将锂离子电池和双电层电容器“内部交叉”的新型混合储能器件,兼具高能量密度和高功率密度,近年来引起了国内外的广泛关注.本文阐述了锂离子电容器的工作原理和国内外产业发展现状,总结了碳负极的预赋锂技术、电极材料与体系匹配性研究等关键技术前沿的研究成果,并提出了后续产业化研究中所需要解决的实际问题.     

Sandwich‐Structured Graphene–Nickel Silicate–Nickel Ternary Composites as Superior Anode Materials for Lithium‐Ion Batteries

We report the synthesis of sandwich‐structured graphene–nickel silicate–Ni ternary composites by using the solvothermal method followed by a simple in situ reduction procedure. The composites show an interesting structure with graphene sandwiched between two layers of well‐dispersed Ni nanoparticles (NPs) anchored on ultrathin nickel silicate nanosheets. These ternary composites exhibit enhanced performance as anode materials owing to the synergistic effect between the graphene matrix and electrochemically inert Ni nanoparticles, an effect that holds promise for the design and fabrication of other advanced electrode materials.     

二价与四价金属离子等摩尔共掺杂的锂离子电池正极材料LiMn1.9Mg0.05Ti0.05O4的制备与表征

以氢氧化锂、乙酸锰、硝酸镁和钛酸丁酯为原料, 以柠檬酸为螯合剂, 采用溶胶-凝胶法制备了二价镁离子与四价钛离子等摩尔共掺杂的尖晶石型锂离子电池正极材料LiMn_1.9Mg_0.05Ti_0.05O₄. 采用热重分析(TGA), X射线衍射(XRD), 扫描电子显微镜(SEM), 透射电子显微镜(TEM)和电化学性能测试(包括循环伏安(CV)和电化学交流阻抗谱(EIS)测试)对所得样品的结构、形貌及电化学性能进行了表征. 结果表明: 780℃下煅烧12 h 得到了颗粒均匀细小的尖晶石型结构的LiMn_1.9Mg_0.05Ti_0.05O₄材料, 该材料具有良好的电化学性能, 在室温下以0.5C倍率充放电, 在4.35-3.30 V电位范围内放电比容量达到126.8 mAh·g^-1, 循环50 次后放电比容量仍为118.5mAh·g^-1, 容量保持率为93.5%. 在55℃高温下循环30次后的放电比容量为111.9 mAh·g^-1, 容量保持率达到91.9%, 远远高于未掺杂的LiMn₂O₄的容量保存率. 二价镁离子与四价钛离子等摩尔共掺杂LiMn₂O₄, 改善了尖晶石锰酸锂的电子导电和离子导电性能, 使其倍率性能和高温性能都得到了明显的提高.     

锂离子电池正极材料LiNi0.5Co0.4Al0.1O2的合成与性能

采用高温固相法制备了锂离子电池正极材料LiNi_0.5Co_0.4Al_0.1O₂。采用X射线衍射(XRD)、傅里叶红外光谱(FTIR)、扫描电子显微镜(SEM)对材料的结构及表观形貌进行分析。通过恒电流充放电以及循环伏安法进行了电化学性能测试。测试结果表明,充放电电压在3~4.5 V之间,在0.2C倍率下首次放电比容量达到159.9 mAh·g^-1,经50次循环充放电后放电容量为142.6 mAh·g^-1,表现出良好的电化学性能。     

锂硫电池正极用硫/介孔碳复合材料的制备及电化学性能

制备了以十二烷基硫酸钠(SDS)为模板的介孔碳,并将介孔碳和单质硫采用熔融渗透法复合制得硫/介孔碳复合材料。SEM、TEM和BET结果显示介孔碳成直径约为500 nm的大小均一的球体,存在孔径为2 nm的微孔;单质硫充分填充在介孔碳的微孔中。以硫/介孔碳复合物作为锂硫电池正极材料时显示出高的电化学性能。初始放电容量高达1519 mAh·g^-1,在200 mA·g^-1的电流密度下充放电200个循环后依然能保持在835 mAh·g^-1。硫/介孔碳复合材料的高倍率性能和优异的循环稳定性,源于介孔碳良好的导电性及其孔结构的固硫作用。     

海藻糖标准样品的研制

研制了海藻糖国家标准样品。以食品级海藻糖粗品为原料,纯化制备海藻糖,采用红外光谱(IR)、质谱和核磁共振谱(NMR)以及单晶衍射等方法进行结构确证。样品分装成400瓶后,采用离子色谱法进行均匀性、稳定性检验和定值分析。从样品中随机抽取15瓶进行均匀性检验,经F检验表明,在95%的置信区间范围内,样品均匀性良好。在40℃下,经过24个月稳定性考察,结果表明样品稳定性良好。标准样品经国内8家具有分析资质的实验室进行协同定值,并评定了定值结果的不确定度,海藻糖标准样品定值结果为99.72%,扩展不确定度为0.26%(k=1.96)。该标准样品达到国家标准样品的技术要求,可用于有关海藻糖的方法校正和质量控制。     

New PP/PLA/cellulose composites: effect of cellulose functionalization on accelerated weathering behavior (accelerated weathering behavior of new PP/PLA/cellulose composites)

Polylactic acid (PLA) was used as partial replacement for conventional thermoplastic matrix, new composites comprising cellulose, polypropylene (PP), and PLA being realized. In order to obtain a compatible interface between cellulosic pulp and polymeric matrix, two chemical modifications of cellulose with stearoyl chloride and toluene di‐isocyanate (TDI) were performed, structural changes being evidenced by X‐ray photoelectron spectroscopy and Fourier transform infrared spectroscopy. The composite materials were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, dynamic scanning calorimetry, impact, tensile and melt rheological tests, surface tension, and dynamic vapor sorption. Because promising results for impact strength and Young modulus were recorded when replacing 15% of PP with PLA in blends of PP with the same cellulosic pulp load, the aim of our study was to assess the behavior to accelerate weathering of composites comprising PP, cellulosic pulp, and PLA. Although the slight decrease in the mechanical properties was recorded after accelerated weathering, the use of functionalized cellulose successfully prevented the deterioration of surface materials, especially for composite comprising stearoyl chloride treated cellulose pulp. Copyright © 2015 John Wiley & Sons, Ltd.     

Fabrication and performance of microencapsulated phase change materials with hybrid shell by in situ polymerization in Pickering emulsion

Microencapsulated phase change materials (MePCMs) using melamine–formaldehyde resin/SiO₂ as shell were investigated in this paper. Organically modified SiO₂ particles were employed to stabilize Pickering emulsion, and in situ polymerization of melamine and formaldehyde was carried out to form hybrid shell. The performances of resultant MePCMs with hybrid shell were investigated comparatively with the MePCMs with polymer shell. SiO₂ particles raise the microencapsulation efficiency by improving the stability of emulsion and providing a precipitation site for melamine–formaldehyde resin. Also, the mechanical strength, thermal reliability, and anti‐osmosis performance of MePCMs were improved significantly by SiO₂ particles in the shell. Our study shows that Pickering emulsion is a simple and robust template for MePCMs with polymer‐inorganic hybrid shell. Copyright © 2015 John Wiley & Sons, Ltd.